Our ReVolt Pub

Hello
I have a problem with one car namely mean the Aston Martin V12 Vanquish is elevated a little and you can not ride it.
I tried to lower the car body but this is only my lowered car body and the wheels remained in the air. Does anyone know what is wrong with this car and could help me I would be grateful.
Link to the car:
http://revoltzone.net/cars/2422/Aston%2 ... uish%20V12

Lower the wheel offsets.

I do not know so well to changing anything in the performance of the car so it does not spoil, but thanks for the good advice I'll try to make a difference as you say.

I give up I've tried to remove cons, move somehow numbers to those who are already in Offset 2 I added my own number, and nothing moved the wheels or the rear wheels in place or in general could not see them. So I turn to you because they are modeling cars and certainly better at this than I know you glanced at the parameters and tried to do something about what move or where things change.


WHEEL 0 { ; Start Wheel
ModelNum 1
Offset1 -25.000000 -3.000000 46.000000
Offset2 0.000000 0.000000 0.000000
IsPresent TRUE
IsPowered TRUE
IsTurnable TRUE
SteerRatio -0.500000
EngineRatio 5000.000000
Radius 11.500000
Mass 0.150000
Gravity 2200.000000
MaxPos 9.000000
SkidWidth 10.000000
ToeIn 0.000000
AxleFriction 0.020000
Grip 0.009600
StaticFriction 1.800000
KineticFriction 1.650000


WHEEL 1 { ; Start Wheel
ModelNum 2
Offset1 25.000000 -3.000000 46.000000
Offset2 0.000000 0.000000 0.000000
IsPresent TRUE
IsPowered TRUE
IsTurnable TRUE
SteerRatio -0.500000
EngineRatio 5000.000000
Radius 11.500000
Mass 0.150000
Gravity 2200.000000
MaxPos 9.000000
SkidWidth 10.000000
ToeIn 0.000000
AxleFriction 0.020000
Grip 0.009600
StaticFriction 1.800000
KineticFriction 1.650000


WHEEL 2 { ; Start Wheel
ModelNum 3
Offset1 -25.000000 -2.000000 -43.500000
Offset2 0.000000 0.000000 0.000000
IsPresent TRUE
IsPowered TRUE
IsTurnable FALSE
SteerRatio 0.000000
EngineRatio 9000.000000
Radius 11.500000
Mass 0.150000
Gravity 2200.000000
MaxPos 9.000000
SkidWidth 10.000000
ToeIn 0.000000
AxleFriction 0.050000
Grip 0.010600
StaticFriction 1.800000
KineticFriction 1.650000


WHEEL 3 { ; Start Wheel
ModelNum 4
Offset1 25.000000 -2.000000 -43.500000
Offset2 0.000000 0.000000 0.000000
IsPresent TRUE
IsPowered TRUE
IsTurnable FALSE
SteerRatio 0.000000
EngineRatio 9000.000000
Radius 11.500000
Mass 0.150000
Gravity 2200.000000
MaxPos 9.000000
SkidWidth 10.000000
ToeIn 0.000000
AxleFriction 0.050000
Grip 0.010600
StaticFriction 1.800000
KineticFriction 1.650000

;====================
; Car Body details
;====================

BODY { ; Start Body
ModelNum 0 ; Model Number in above list
Offset 0, 0, 0 ; Calculated in game


What is this Offset in your parameters?

The offset for the Y axis is -16. There are numerous other problems with the params such as the weight, it's far too light.

I just remembered, I actually made a temporary fix for this car when it was new so it was at least driveable. Maybe I should just give him that.

Citywalker
I know where to cut the body of the car but I am just about to lower a car wheel. As I downloaded this car, these were the parameters I changed nothing in them.

http://vlep.pl/ktnsv0.jpg

As you can see the car is hanging a little above the floor as the lowering of the body of the car is the wheels in place, and if I try to move it or you do not see the wheel or front-wheel land where they are rear-wheel drive, another example of the wheel axle widens or narrows even managed something move the car lurched to the right side and began Aug. strange turn.
I really think I've tried all possible options but I could not cut or some wheels.

Skarma is right. Set body offset's second value to 0, not -16.

Damn guys hard for me to explain. How lowering of the body of the car is the wheel I do not degrade and can not go through it, and the rub that I mean only a reduction in the wheel, because the body of the car already lowered offset to 0
This is the lowering of the car as only the body of the car:

http://vlep.pl/xdlymc.jpg

Now everything is ok Thanks to you guys for help.